Check the listing for details. Hunter Geniune Replacement Handheld Ceiling Fan Remote Control Transmitter 99119. Color: White, Condition: New. Listed at 39.99 USD. Genuine Original Hunter Replacement Remote Control #99119 For Hunter Ceiling Fans This is a direct replacement for remote # 99119 ONLY Wall Bracket/Cradle not included Wireless receiver not included NOTE: This is NOT compatible with older versions like #27185 that have dip-swicthes Requires 3V CR2032 Battery (included) Part #K0471-01 FCC ID: IN2TX43 FREQ: 434 MHz Part #K0471 must match for compatibility. Please inquire if you're not sure. Pairing Instructions (The remote must be paired before the fan will operate.) - Turn OFF power at the breaker for at least 30 seconds - Turn ON power at the breaker - Within 3 minutes of restoring power to the fan, press both the Fan Off button and the High button for at least 4 seconds. Your fan will turn on low to indicate successful syncing. If it does not, turn off power to your fan, wait 1 minute then try again. If using the transmitter with multiple fans, repeat this process for each fan. - IMPORTANT: Use the pull-chain switch on the fan to set the fan speed to the HIGH position before operation.