Check the listing for details. Lutron LUT-LBX-WH Synthetic Minimum Load Dimmer Module 120V White. Condition: New. Listed at 150.00 USD. Lutron LUT-LBX-WH Synthetic Minimum Load Dimmer Module 120V White The Lutron LUX-LBX 120 volt device provides capability for certain Lutron dimmers to control low-wattage loads from 0 watts up to the dimmer’s minimum rating. It presents a simulated load to the dimmer to meet the minimum load requirements even when the actual load is smaller. This "load-side" device installs on the zone wiring in parallel with the lighting load. It provides an equivalent minimum load for Lutron dimmers when the actual load is too low for proper control unit operation. FEATURES Works with forward phase or leading edge dimmers and reverse phase or trailing edge dimmers Input: 120 V 100 mA 50 / 60 Hz Dissapates a maximum of 10 watts when the controlling dimmer is near high-end Color: White DETAILS SOURCES/LOAD TYPES* *The dimmer must be rated for the load type being used. The LUT-LBX does not change the approved load types of the dimmer, just the minimum load requirement. For example, MLV loads must still be used with MLV dimmers. Operates these sources when wired in parallel with the load: Incandescent (Tungsten) Halogen Magnetic Low-Voltage Transformer Electronic Low-Voltage Transformer Lutron Tu-Wire Electronic Fluorescent Dimming Ballast Neon/Cold Cathode LED lighting (refer to Application Note #138 for further details) TERMINALS Accepts up to two 12 AWG (2.5 mm2) wires ENVIROMENT 32 - 104 °F (0 - 40 °C). Relative humidity less than 90% non-condensing MOUNTING Surface or recess mount indoors only EMC Immunity Surge protection up to 6 kV, 3000 A, IEEE std. C62.41 ESD protection up to 16 kV Lutron LUX-LBX installation instructions here