Check the listing for details. SH .07 07 Side Exhaust Nitro RC Remote Control Airplane 2-Stroke Engine. Condition: New. Listed at 129.99 USD. This is the SH 07 Glow Engine. It is an R/C model aircraft engine with a .07c.i. displacement designed for 1/2A size radio controll model aircraft.This 07 INCLUDES the tuned pipe and header.Features:-Dual Needle R/C Throttle Carburetor-Dual Ball Bearing Supported Crankshaft-Removable Prop Adapter and Spinner Nut-ABC (Aluminum Piston, Brass Sleeve, Chrome Plated) construction-Uses a #3 SH Glow Plug-Side Exhaust as commonly used in most aircraft applicationsSpecifications:Displacement: 1.14cc/.07ciBore: 11.5mmStroke: 11mmRPM Range: 6000 ~ 17000 rpmWeight: 100.2g/3.5oz Recommended AccessoriesGlow Fuel: 10-30% Nitro, two stroke glow fuel. We generally use PowerMaster Sport Model Airplane Fuel or similar.Glow Plug: The engine includes one SH #3 Glow Plug, this is also the recommended replacement when needed.Propeller: We use a 7x4, however the engine can use a 6x4, 6x5. 7x3, 7x4, and 8x3Glow Ignitor: You will need a connector and 1.5v power source to light the glow plug for starting. The glow plug is a standard size so just about any glow starter will work fine.Pump: You have to get the fuel from the can into the fuel tank in the planeFuel Line: This is glow fuel, you'll need a compatible fuel line such as siliconeFuel Tank: We recommend a 2oz tank.Electric Starter: Life is much easier with an electric starter. You can hand prop this engine, but it is vastly easier with a starter. Installation: If your airplane doesn't already have one build-in, you'll need a motor mount, and you'll need a small wire or other device to support/mount the tuned pipe. It needs to be supported at the end or it will fall off in flight.